How wide is a typical standard pivot door?

Standard-sized pivot doors in the United States are 80″ tall (6′ 8″) and between 30″ and 36″ wide. The most common width is 36″.

Large Pivot Doors offers a variety of custom made door panels to fit any size and requirement. From very large, to standard size interior / exterior doors, and even high end designs.

Don’t let the “standard” constrain your design when you can be free with the amazing pivot doors offered by Large Pivot Doors .

What is the width of a normal pivot door?

Typical pivot doors, including pivot sliding doors, are 36″ wide in the United States, although they may range from 30″ to 36″.

Standard pivot door sizes are:

  1. 36″ x 80″ x 1 3/8″
  2. 32″ x 80″ x 1 3/8″
  3. 30″ x 80″ x 1 3/8″
  4. 36″ x 96″ x 1 3/8″
  5. 32″ x 96″ x 1 3/8″

For wide doors in a limited space it is common to double up on doors using two doors which open side by side, or an increasingly popular option are custom pivot doors, which offer the grand feel of a wider than standard pivot door while maintaining space savings and usability.

What is the standard width of a bathroom door?

The most common size for a bathroom door is 32″. Your pivoting bathroom door, should fit inside the door opening For instance, add 3 1/4 inches to the width of your pivot door slab and 4 inches to its height to determine the necessary size of your rough opening for your pivot door. Although, in tight spaces bathroom door openings can be as little as 28″ or 24″ inches wide. For spaces that require wheel chair access, doors should be at least 36″ wide to accommodate all ability levels.

When building a bathroom door, be sure that you have considered every eventuality. Particular to bathrooms are concerns about moisture and sound penetration. SingCore panels are particularly suited to harsh environments. We guarantee the structure of our panels for 50-years, which means you are able to count on your bathroom door functioning flawlessly for years to come.

Further, we offer patented foam and wood composite hybrid cores for increased sound deadening and climate control far beyond commonly found door designs. Keep your private time private with SingCore.

What is a standard pivot door height?

Standard pivot doors in the United States are 80″ tall (6′ 8″) and between 30″ and 36″ wide. The most common width is 36″, but may be as narrow as 30″ depending on the width of the door opening. Be certain to allow for 3.25 (width) and 4 (height) inches room within the rough opening to allow for hardware and door frame.

Standard-size exterior pivot door size

Typical exterior pivot doors in the United States are 80″ tall and 36″ wide. There is some variation in width from 30″ to 36″ inches. 36″ wide doors are recommended to allow for easy access for the disabled, or wider (custom) and must use an extreme edge pivot hardware to fully access the door opening.

SingCore also offers “standard oversize” pivot doors at 8′ by 4′ (actual size 97.5″ x 47.5″) that are suitable for designs that stand above the crowd without excessive expense. In particular, we are well known for our work with custom oversize pivot doors, huge sliding doors, metal skin doors, and solid “wood stave” doors for higher end applications.

Standard bathroom door size

Although there is no standard door size, the majority of the bathroom doors in the US are 80″ tall and 32″ wide. Some doors vary between 28″ and 36″ wide. Be sure to measure your door opening, allowing extra four -inches to the opening height and three and a quarter-inches to the width for proper door articulation.

American standard pivot door size

Although there is no mandatory standard size, interior doors are typically 80″ tall and 36″ wide, while exterior doors can be as much as 96″ tall and 36″ wide.

Proudly Made in America

Standard pivot door height

Since most door openings are 80″ tall in the United States, so are the doors that match or are replacement doors. While 80″ is likely the replacement height of your pivot door.

For a unique or above average look, SingCore recommends 95.5″ tall door openings for installation in a typical residential home, and taller for multi-million dollar homes or commercial spaces with high ceilings. Note these will require a custom pivot door solution.

Pivot Door Pricing

Standard Pivot Door Pricing for a normal size 3 ft. wide by 6′ 8″ tall would be in the $15,000 range for finished door, hardware and installation. Range expands exponentially according to increased size. For instance, a 9 ft. by 11 ft. pivot door would have a price tag of well over $20,000. Just the unfinished pivot door blank can run $3,000 to $20,000 itself.

What Can We Do for You?

SingCore offers a wide variety of finishes and completely custom sizing for high end pivot door panels, and other architectural pivoting panels. Contact us today with details about your next project to see how SingCore can help you!

Standard Pivot Door Widths